sachet packing machine

(1) Forming width can reach 450mm. (2) Packing capacity can reach 90cutting/min. (3)Machine adopt two rolls of film converge from two sides to heat sealing.Automatic mark correction and easy adjustment. (4)Machine is controlled and adjusted by servo motor.Each actuator is adjusted by HMI. (5)The unwinding adopt air-expansion shaft to bear roll material,easy and convenient for film replacement. (6)Equipped with detection of material shortage and removement device, ensure the unqualified product are removed from qualified prodoct. (7)Multiple embossing type can be equipped. (8)Horizontal cutter is controlled by servo motor directly,low noise,reliable cutting, working steadily in a long-term. (9)Reasonable layout,easy operation,good appearance.

(1)Sealing width can be max 600mm, so the machine can do 5 to 10 lanes. (2)The machine use one roll packing film which can be divided two parts for sealing, convenient adjustment. (3)Lengthways sealing, across sealing, embossing, pertferation knife and finished sachet cutter all were controled by servo motor. (4)Controlling system: with HMI control and buttone control, this is convinent for the operator to control the machine. (5)If no packing material,machine will not absorb the carton and leaflet,pusher will stop working. (6)Machine will stop automatically when ancillary stock in low level. (7) Machine will stop automatically when there are leaflets but lack of box for three times. (8)Machine will stop automatically when there are packaged product but lack of leaflets for three times.

(1)The sealing area can reach 450mm, form 5 to 9 sachets. (2)The machine use one roll packing film which can be divided two parts for sealing, convenient adjustment.。 (3)The position of emboss,horizontal break and horizontal cutting can be adjusted and controlled by differential through HMI.Position of vertical seal device adjusted and controlled by servo motor through HMI. (4)Vertical sealing,horizontal sealing,emboss and cutting device are installed on two standing board which with enough stiffness to make sure same quantity of each sachet. (5)Reasonable layout,small volume and nice appearance.

1. Sealing width can be 350mm. 2. Automatic control, stepless speed regulation. 3. Two rolls of packing material heat sealing from two sides to the middle,correct mark automatically and accurately,easy to adjust. 4. Executive mechanisms of sealing, printing, tear-off-lining, cutting, feeding featured in easy adjustment, safe and reliable operation. 5. New structure, diversified configuration meeting client's different requirement. 6. Double side mark tracking can be equipped with detection rejection device. 7. Optical fiber detection device is equipped with dust cover,easy to clear up.

1. Sealing width can be 350mm. 2. Automatic control, stepless speed regulation. 3. Two rolls of packing material heat sealing from two sides to the middle,correct mark automatically and accurately,easy to adjust. 4. Executive mechanisms of sealing, printing, tear-off-lining, cutting, feeding featured in easy adjustment, safe and reliable operation. 5. New structure, diversified configuration meeting client's different requirement. 6. Double side mark tracking can be equipped with detection rejection device. 7. Optical fiber detection device is equipped with dust cover,easy to clear up.

(1)Sealing width can be max 600mm, so the machine can do 5 to 10 lanes. (2)The machine uses one roller film which was divided to two pieces in the middle, which bring the convinence for the fast following eye-mark. (3)Lengthways sealing, across sealing, embossing, pertferation knife and finished sachet cutter all were controled by servo motor. (4)Lenthways sealing and across sealing, embossing and maine cutter were installation on the machine’s body sides board, which is strong enough to support the machine run continuelly. (5)The machine structure is compatitive, takes little roomand beautiful desgin. (6)Electric control pannel: with big room installation. (7)Controlling system: with HMI control and buttone control, this is convinent for the operator to control the machine.

(1)Sealing width can be max 600mm, so the machine can do 5 to 10 lanes. (2)The machine uses one roller film which was divided to two pieces in the middle, which bring the convinence for the fast following eye-mark. (3)Lengthways sealing, across sealing, embossing, pertferation knife and finished sachet cutter all were controled by servo motor. (4)Lenthways sealing and across sealing, embossing and maine cutter were installation on the machine’s body sides board, which is strong enough to support the machine run continuelly. (5)The machine structure is compatitive, takes little roomand beautiful desgin. (6)Electric control pannel: with big room installation. (7)Controlling system: with HMI control and buttone control, this is convinent for the operator to control the machine.