Supply China Electric Gadget Battery Blister Packaging Machine Company
(1)Space of forming,sealing,cutting system can be adjusted freely,suitable for different size plate
(2)Manipulator guiding,adjustable stroke,simple operation,reliability running
(3)Cycloidal reducer to keep long life,lower noise
(4)Simplicity and convenience of replacing different molds.Changeable frequency
(5)It can be equipped cursor register,servo motor control stroke
Supply Electric Gadget Blister Packaging Machine, China Battery Blister Packing Machine, Battery Blister Packing Machine Company
Introduction
This machine is suitable for capsules,tablets,candy and other Alu-PVC, Alu-Alu,paper-plastic packaging of medicine, food, electronic industries. Besides the aluminum automatic feeding , the upper and lower texture,concavo-convex cooperating work-team, multi-stage cylinder heat sealing,automatic pressing and printing batch number and aluminum double heating, the machine also has the following characteristics.
Main technical parameters
1. Packing film
（1）Nontoxic PVC： 0.15~0.50×250mm（Thickness×Width） meet GB5663-8A requirement.
（2）Composite forming：0.14~0.15×250mm（Thickness×Width）
outside roller film diameter ≤Φ400mm
inside roller film diameterΦ70-Φ76mm.
（3）PTP： 0.02×250mm（Thickness×Width）
outside roller film diameter：≤φ280mm
inside roller film diameterΦ70-Φ76mm
2. Cutting times：25~40times/min，4pcs/time
3. Stepping range：60~200mm。
4. Max forming area：160×240mm。
5. Max forming depth：30mm。
6. Total power：6KW
7. Displacement：>0.3m³/min（provide yourself）
Pressure：0.6～0.8MPa 。
8. Mold cooling：tap water or recycled water consumption：60L/h。
9. Machine size：3600×800×1650mm。（L*W*H）
10. Weight：1650kg
11. Power：220/380V 50Hz
Working principle
PVC hard sheet material is drawn by the open coil mechanism to pull out certain length, supply the next step demand, after heating device, forming device forms bubble cover. After molding, the PVC bubble cover is formed into the intermittent traction of the mechanism, and the continuous working is formed by the continuous bubble belt. The bubble into the feeding part of the platform, the drug by feeding (battery, electric component,bottle etc.) filling in the PVC blister has formed, before the heat sealing and then inhibits PTP aluminum foil to cover in the upper blister, together into the sealing, sealing device for rolling is packaging is placed in the PVC blister and the aluminum foil sealing holes in the nest; This insulates the drug from the atmosphere. And enter the batch number device, according to the preset steel character indentation marks (or broken lines), and then by typing adjusting roller, cutting step into the cutting device packaging semi-finished products of continuous cutting apart, so as to achieve the desired aluminum-plastic blister packaging sector.
Packing and moving
(1)The machine should be tied up before the box, preventing the falling, and tying up the cylinder before and after the cylinder, so that the piston rod can not be sent out. Foam plastic between the top and bottom heating boards, together, tied up with ropes. Typing, cutting should be in close condition. All rotating parts need to be fixed.
(2) Use compressed air to blow the water out of the waterways.
(3) The center of gravity is at the center of the big board, and the position and direction should be indicated according to the drawing. When packing, remove the floor foot and use the foot nut to hold the fixed plate (or other fixed plate) together with the box base.
(4) Before the case, the relevant documents are packed in a file bag and carried on random. We can also make the plastic shield.
(5) The rear of the machine is close to the forklift, which should prevent the dumping, collision or turbulence.
Related Products:
