Granule Sachet Filling Machine

  • Quality Granule Sachet Filling Machine, Granule Sachet Filling Machine Manufacturers, Granule Sachet Filling Machine Producers
  • Quality Granule Sachet Filling Machine, Granule Sachet Filling Machine Manufacturers, Granule Sachet Filling Machine Producers
  • Quality Granule Sachet Filling Machine, Granule Sachet Filling Machine Manufacturers, Granule Sachet Filling Machine Producers
Granule Sachet Filling Machine

(1)The sealing area can reach 450mm, form 5 to 9 sachets.
(2)The machine use one roll packing film which can be divided two parts for sealing, convenient adjustment.。
(3)The position of emboss,horizontal break and horizontal cutting can be adjusted and controlled by differential through HMI.Position of vertical seal device adjusted and controlled by servo motor through HMI.
(4)Vertical sealing,horizontal sealing,emboss and cutting device are installed on two standing board which with enough stiffness to make sure same quantity of each sachet.
(5)Reasonable layout,small volume and nice appearance.

Introduction

This machine run stable with compact structure, it is leading the advanced level of the same domestic packing machine, can be applicable for pharmaceutical, food, cosmetic industries. It can pack granule, powder, liquid and semi-sticky liquid four sides sachets.


Performance

(1)Adjust the sachet length by servo motor,simple operation.

(2)The whole machine controlled by human-machine interface, is easy operation and run stable.

(3)Photoelectric detect mark,servo motor track the mark to make sure integrity and accuracy of pattern position.

(4)Print batch number,vertical and horizontal break line and easy tear automatically.Convenient to install and operate.

(5)Adjust the sachet length optionally.(The speed of vertical seal roller can be adjusted optionally.)


Technical Specifications

1. Packing material:Aluminum-plastic, paper- plastic and other composite material which can be heat sealing.

Specifications:Width:Max 928mm

Thickness:0.07~0.1mm

Film outer diameter:≤φ300mm 

Film inner diameter:φ70~φ76mm

2. Sealing width:≤464mm

3. Sachet size:Length 55~180 mm ;Width 40 ~150 mm

4. Dose range:Granule:1~20g ;Liquid:5~50ml

5. Horizontal cutting frequency:≤50times∕min(depend on sachet quantity and length)

6. Packing capacity:Max 400sachets∕min(depend on sachet quantity and length)

7. Main servo motor power:1kW  Rotational Speed:3000rpm/min.

8. Vertical sealing servo motor power:0.75kW  Rotational Speed:3000rpm/min.

9. Micro motor total power:0.025kW ×3=0.075kW。

10. Sealing roller heating total power:1.5kW×4=6kW  (ф22×540×4pcs)

11. Total power:8kW

12. Weight:About 1200kg

13. Supply:380V 、 50Hz

14. Size(L×W×H):1600mm×1700mm×2050 mm

 

Working theory

Firstly, the wrapper through the spreading roller unit come to dividing roller unit which the wrapper is cut two parts, then through the dividing roller board and roller into sealing area, enter into lengthways sealing, across sealing, feeding, typing, lengthways cutting, cross-easy cut line ,transverse cutting and finally product from conveyor output.

 Granule sachet packing machine

Main structure

The machine is composed of machine body, drive system, spreading roller system, dividing roller system, feeding system, sealing﹑typing﹑cutting unit, waste receiving unit, conveyor belt and electronic and gas system and so on.


Equipment installation

1. When swing the machine, make M16 bolt enter into the screw inside the foundation of the machine tool, use steel stick to pry the M16 bolt to uplift the machine, fill up the timber to make the machine leave away the carton. Then use vehicle put up the machine, install the feet screw.           

2. Keep enough active space around the device setting up place, this is convenient to operate; the ground should own enough intensity to hold the device.

3. Adjust the device’s level to the condition of working level with the help of the device of tail.

4. Clean the nasty on the surface, you should remember: don’t detach and break the machine, clean all the lubricant area.

5. Check in power、electric pressure and frequency, you should keep them consistent with the device requires, electric pressure:380v, frequency:50hz, keep the power line connecting with changeable on-off behind the electric control box, in the same time ,shut all the automatic on-off in the electrical control.

6. The air pressure of the receive source is 0.6Mpa.

7. Check the operation direction is right or not, make sure the main engine’s rotate direction is not wrong.

Package and transportation of equipment

8. Spread the oil on driving mechanism before shippment,spread the liquid paraffin on the surface.

9. Before the packaging of the equipment the transporter、load material feeder、chute and wrap material roll is unloaded and packaged in addition.

10. In order to avoid the bump in transportation, make sure the lengthways roll、across sealing roll and so on components which are easy bumped are fixed and packed.

11. Use angle iron fixed the equipment and the basement of packaging box.

12. In transportation, the packaging box and the bodywork firmly fixed.

13. If you ship the machine by sea,please make dampproof measure.



Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right