Buy Cheap High-Speed Liquid Filling Production Line Manufacturers
(1)Easy to operate, safety and reduce the cost of packing material.
(2)Module design, simple structure, short design cycle, higher working capacity.
(3)The packing material can be single material or composite material.
(4)The machine body structure is assembled firm and well-knit.
(5)Higher utilization of packing film which can be more than 95%, some is more than 99%.
(6)The height of bottle can be 60mm to 120mm and filling dose can be 1ml-120ml.
(7) Throughout the cutting device, can divide the plate into single piece or multi pieces connected according to requirement.
Buy High-Speed Liquid Filling Production Line, Cheap Production Line, Liquid Filling Line Manufacturers
Introduction
Automatic liquid filling machine and carton packing machine production line is equipped with international high level technology,is the best products in domestic field.This machine adopt a roll of material to form bottle after folding,heating,then filling pump immit the liquid,semi-liquid and semi-sticky products in exactly dose volume.Finally transport finished product to carton packing machine and insert into carton.Unique structure,multiple functions,stable operation,reliable quality.The whole process without manual operation,reduce labor cost,low noise,meet GMP quality standard. The production line can be OEM according to the customer requirements.
SGA40 Liquid Filling Machine
Technical parameter
1、Machine dimension：8500x1200x1800mm（L * W *H）
2、Weight：3150Kg
3、Power：Three Phase 380V 50Hz
4、Power consumption ：36kw
5、Power cable sectional area：>6mm²
6、Frequency：50Hz。
7、Largest current：15.5A
8、Compressed air consumption：0.6Mpa， 110L/min。
9、Cooling water inside and outside tube size：Φ10mm
10、Air input tube size：Φ10mm
11、The cooling water consumption：Temperature 14-18℃，pressure 0.15--0.2Mpa，and closed circle is 280L/H
12、Packing Film：PVC/PE（PET/PE）
Standard (0.3~0.4)*250max（mm）up to the mould
Outside diameter of the film roller: Φ440mm Inside roller: Φ76mm
13、Number of each board ：7-15pieces。
14、Capacity：20-35pcs/min
15、Filling range：1-120ml/pc
16、Filling accuracy：≤3%
17、Forming depth for two sides：10-25mm
18、One side sealing depth: 2-12.5mm
Working principle
SGA40 liquid packing machine is using plastic ampoule bottle to pack unit dosage liquid or semi-liquid product. To use thermal forming plastic film, it can be folded in half then formed through plastic film folding device. If needed, this machine also can produce flat-bottom plastic ampoule bottle. SGA40 liquid packing machine can finish the process of forming, filling, sealing then the finished product outputted out of the machine after blanking.
CM450 Carton Packing Machine
Main Technical Parameter
Power: AC380 50HZ three-phase five-wire power supply
Maximum power consumption: 12.0 kw (To match full servo power)
Production output
Mainframe machine running speed： max 500 box/min
Folder running speed: max 600 page/min
Production line matching speed: 450/min
Gas consumption：0.2-0.3m3/min (pressure: 0.5-0.7MPa)
Appearance dimension：5000*1420*1750mm (length×width ×height)
Machine weight: ~4.2×103kg
Noise: ≤75dB
Working principle
By conducting a series of precise machinery transmission and roller chain driving. CM450 achieved automatic carton suction, carton opening, leaflet suction and folding, packed material transmission/cartoning/embossing, carton sealing.
Related Products:
